Facebook Twitter Linked In
 

Tableau
Tableau manufactures several families of "forensic bridges" (hardware write blockers). Forensic bridges have two key functions:
  • Adapt the storage device's native interface (e.g., IDE, SATA, SCSI, or USB), to a more convenient computer interface such as FireWire or USB.
  • Prevent modification to the subject storage device.

Tableau also manufactures a full line of power supply and cable accessories to complement the forensic bridges.

Training & Events

Sorry there are no training Courses offered by this Supplier.

Videos

TK35u Forensic IDE/SATA Bridge Kit

The Tableau T35u USB 3.0 Forensic IDE/SATA Bridge supports write-blocked, forensic acquisitions of both SATA and IDE storage devices through a fast USB 3.0 host connection. The T35u offers forensic examiners the ease of use, reliability, and imaging speed necessary to image today's larger and faster hard-disk drives - in both lab or field environments.

The T35u is a bare bridge, while the TK35u is the Bridge Kit which includes a power supply, cables and adapters.

With the advent of USB 3.0, the clutter of multiple host connections has been replaced by a single Super Speed USB 3.0 port. With the T35u, you'll have the robust write-blocking technology that is the standard by which all other SATA and IDE write blockers are measured, now powered by the performance potential of USB 3.0. Still just as easy to use as ever; simply connect, power up, and image.

For added security, T35u introduces the new 'Firmware Update' button, which places the T35u in a special mode for updating its firmware through the Tableau Firmware Update (TFU) utility. TFU has been rewritten for updates via USB, making it easier than ever to maintain the correct version of firmware on new Tableau products.

ProductUSB 3.0 Forensic Bridge
Tableau Model T35u / T35u-RW
 
 
 
Connectors: Host side (Rear)
USBOne USB 3.0 Type B (9- pin, super/ high/full/low speed)
DC InputOne 5-pin Mini-DIN connector for use with Tableau TP2 power supply, and one bayonet connector for use with future power supply options
 
 
 
Connectors: Device Side
SATASATA Signal Connector
IDEIDE Signal Connector
DC Out4-pin 3M drive power connector (power to SATA or IDE hard disk)
 
 
 
Switches
PowerToggles DC power for T35u and T35u-RW
DIP Switch4-position DIP switch selects field-configurable options (DIP Switches can be accessed by removing a knock-out panel on the side of the T35u or T35u-RW case)
 
 
 
Other Features
Status LEDs7 LEDs: DC IN good, Power ON, IDE drive detected, SATA drive detected, Host connected, Write-block enabled, Drive activity
Factory ConfigurationBlack-case units are configured as read-only (model T35u)
Yellow-case units are configured as read-write (model T35u-RW)
 
 
 
Compatibility
SATA DevicesSATA 1 or SATA 2 hard disk devices
IDE DevicesParallel ATA hard disk devices with LBA (Logical Block Addressing) support
Host InterfaceUSB 3.0 (Backward compatible with USB high/full/low speed)
Host O/SWindows XP/2000/newer, Macintosh OS X, most Linux distributions (note: Linux distributions have varying levels and quality of support for USB 3.0)
 
 
 
Physical / Environmental
Power5-6 watts typical operating (not including hard disk)
Supply voltage (DC IN)+5VDC @ 2A, +12VDC @ 2A (includes budget for hard disk)
Output voltage (DC OUT)+5VDC @ 1A, +12VDC @ 1A
Dimensions5.75 in. (L) x 3.25 in. (W) x 1.125 in. (H)
Weight5.9oz (168g)
Operating temperature range0 to 55 degrees C (no airflow)
Storage temperature range-40 to 70 degrees C
Relative humidityUp to 90% (non-condensing)
 
 
 
WarrantyOne years parts and workmanship from date of purchase

TK35u Forensic IDE/SATA Bridge Kit
Name
Organisation
Phone
Email
Enquiry
Verification Code:
 
Contact us
Australia:+61 (0)2 8012 9810
Singapore:+65 9297 1289
Customer Service:
Technical Support:
Training Bookings:
 
Register For the Fulcrum Newsletter HERE

© Fulcrum Management 2012
Name
Email
Organisation
Phone
Verification Code:
Name
Email
Organisation
Phone
Verification Code: